Metal Roofing Options in Greensboro, NC | Arthur's Roofing

Looking at metal instead of asphalt shingles? Arthur's Roofing installs residential and light-commercial metal systems across Greensboro and the Piedmont Triad. Call (336) 565-5585.

Metal options we actually price

Not every metal roof is the same product. On a Triad home we usually compare three families:

1. Standing seam (premium residential)

Hidden fasteners, vertical panels that lock at raised seams. Best when you want a clean modern look, strong wind performance, and a long service life. Needs a solid underlayment, correct panel clip spacing for the pitch, and careful detailing at valleys, eaves, and wall transitions.

2. Exposed-fastener / screw-down panels

Faster install and a lower entry price than standing seam. Screws and washers stay visible. A good fit for some barns, outbuildings, and budget-conscious residential reroofs — but washer aging and thermal movement mean more maintenance attention over decades than standing seam.

3. Stone-coated / metal shingle profiles

Metal panels formed to look closer to shingles or tile, often with a granulated finish. Useful when HOA or neighborhood character matters but you still want metal durability. Profile choice, weight, and underlayment still have to match the existing deck and ventilation plan.

We also repair and replace flashing, ridge, and trim metal on asphalt jobs — that is different from a full metal system upgrade. See metal roof repair when you only need localized work.

What a metal upgrade actually requires

Before anyone orders panels, these decisions have to be settled on your roof — not a generic flyer:

| Decision | Why it matters | | --- | --- | | Deck condition | Soft or uneven decking must be fixed before panels go down; metal will telegraph bad substrate. | | Underlayment | Synthetic or peel-and-stick underlayment is part of the water plan, especially at eaves and valleys in Piedmont freeze/thaw and wind-driven rain. | | Pitch and geometry | Low-slope or complex valleys may rule out some profiles or need different fastening and seal details. | | Ventilation | Ridge, soffit, and intake must still work after the metal stack-up changes the roof section. | | Fastening and expansion | Steel and aluminum move with heat; clip systems and fastener pattern have to match the panel type. | | Trim and transitions | Sidewalls, chimneys, skylights, and wall caps are where metal roofs leak when rushed. | | Color / finish | Cool-roof finishes cut heat load; finish warranty terms differ by coating system. | | Noise and insulation | Attic insulation and underlayment choices matter more than internet myths about “loud metal rain.” | | HOA / historic rules | Some neighborhoods limit color, profile, or visible fasteners — we check before you buy. |

When metal is (and is not) the right upgrade

Strong fit: you want 40–60 year durability, hail/wind resilience, fire resistance, or a modern look; you are already replacing the roof; measurements show a geometry metal panels can cover cleanly.

Weaker fit: the deck needs major structural work first; the budget only covers a short-term patch; an HOA blocks the profile you want; a small repair would restore a still-young asphalt system.

Arthur's still installs GAF and CertainTeed asphalt systems every week. Metal is an option we price beside those — not a pitch we force.

How we quote metal on Triad homes

1. Measure the real roof from aerial imagery and confirm on-site where photos cannot see pitch, penetrations, or soft deck.
2. Pick the profile family (standing seam, exposed fastener, or stone-coated) against look, budget, and roof geometry.
3. Write the stack-up — tear-off vs overlay (when allowed), underlayment, ventilation, trim, and flashing scope.
4. Price ranges you can compare against asphalt options on the same measurements so the upgrade cost is honest.

Service area

Greensboro, High Point, Winston-Salem, Burlington, and the wider I-40 corridor through the Triad and Triangle edge communities we already serve.

Contact Arthur's Roofing to compare metal options on your roof.

Phone: (336) 565-5585 Service Area: Greensboro, NC, and the surrounding Piedmont Triad.